(2)Plant and Facility Piping – CSA Z662 Code (Note 5.3.20)

SPECIFICATION: E2Z

Service: Sweet Hydrocarbons, Fuel Gas, Glycol, Caustic, Process Drains, Flare, Vent and Air – Low Temperature
Pressure Rating: 24820 kPag
Temperature Rating: -45ºC to 38ºC
ANSI Class: 1500 (/PN 250) (Note 5.3.18)
Corrosion Allowance: 1.6 mm (Note 5.3.6)
PWHT: Note 5.3.14
Non-Des. Test: Visual. Radiographic 15% for buttwelds. Hydro-test to 1.4 times the internal design pressure (i.e. test pressure = 34750 kPag) (Note 5.3.19).
Pressure Design Factors: Design Factor: 0.8, Location Factor: 0.625, Joint Factor: 1.0, Temperature Factor: 1.0.
PIPE
TYPE SIZE RANGE END CONDITIONS GENERAL DESCRIPTION NOTES
PIPE 1/2″ thru 2” THRD & SW Sch. XXS min. wall A333 Gr. 6 SMLS 5.3.1, 5.3.11
PIPE 2″ thru 4″ BW Sch. 160 min. wall A333 Gr. 6 SMLS 5.3.1, 5.3.10
PIPE 6″ BW Sch. XXS min. wall A333 Gr. 6 SMLS 5.3.1, 5.3.10
PIPE All Other Sizes BW WT as per CSA Z662 A333 Gr. 6 SMLS 5.3.1, 5.3.10
FLANGES
TYPE SIZE RANGE RATING/CLASS GENERAL DESCRIPTION NOTES
RTJTHRD/SW 1/2” thru 2” 1500 Schedule to match pipe A350 Gr. LF2, CL.1 5.3.4, 5.3.5,

 

5.3.11

RTJWN 2” thru 24” 1500 Schedule to match A350 Gr. LF2, CL.1 5.3.4, 5.3.5
RTJ BLIND 1/2” thru 24” 1500 A350 Gr. LF2, CL.1 5.3.5
RTJTHRD ORIFICE 1/2″ thru 2” 1500 A350 Gr. LF2, CL.1 5.3.5, 5.3.11
RTJSW ORIFICE 1/2″ thru 2” 1500 Schedule to match pipe A350 Gr. LF2, CL.1 5.3.4, 5.3.5,

 

5.3.11

RTJWN ORIFICE 2” thru 24” 1500 Schedule to match A350 Gr. LF2, CL.1 5.3.4, 5.3.5
FITTINGS
TYPE SIZE RANGE RATING/SCHEDULE GENERAL DESCRIPTION NOTES
THRD & SW 1/2” thru 2” 9000 CWP A350 Gr. LF2, CL.1 (Nipple and swages as 5.3.4, 5.3.11
BW 2″ thru 24” Sch. to match pipe A420 Gr. WPL6 5.3.4
BOLTS & GASKETS
ITEM SIZE RANGE RATING/CLASS GENERAL DESCRIPTION NOTES
BOLTS 1/2” thru 24”   A320 Gr. L7 Stud Bolts c/w A194 Gr. L7 Heavy Hex Nuts  
GASKETS 1/2″ thru 24” 1500 1/8” Thk. Spiral Wound, 316SS, Non-Asbestos Filler (Flexible Graphite Filler)  
RING JOINTS 1/2″ thru 24” 1500 Oval Ring Soft Iron (316 SS)  
OLETS
TYPE SIZE RANGE RATING/SCHEDULE GENERAL DESCRIPTION NOTES
THREAD-O-LET 1/2″ thru 2” 9000 CWP A350 Gr. LF2, CL.1 5.3.11
SOCK-O-LET 1/2″ thru 2” 9000 CWP A350 Gr. LF2, CL.1 5.3.4, 5.3.11
WELD-O-LET 2” thru 10” Sch. to match pipe A350 Gr. LF2, CL.1 5.3.4
VALVES
TYPE SIZE RANGE GENERAL DESCRIPTION TAG
GATE 1/2″ thru 2” CL 1500 THRD A350 Gr. LF2, CL.1 Handwheel Op. GA-2151H
1/2″ thru 2” CL 1500 SW A350 Gr. LF2, CL.1 Handwheel Op. GA-3151H
1/2″ thru 2” CL 1500 SWxTHRD A350 Gr. LF2, CL.1 Handwheel Op. GA-4151H
2” thru 4” CL 1500 RTJ A352 Gr. LCC RP, Handwheel Op. GA-1151HR
2” thru 4” CL 1500 RTJ A352 Gr. LCC FP, Handwheel Op. GA-1151HF
6” thru 24” CL 1500 RTJ A352 Gr. LCC RP, Gear Op. GA-1151GR
6” thru 24” CL 1500 RTJ A352 Gr. LCC FP, Gear Op. GA-1151GF
BALL 1/2″ thru 2” 6000 CWP THRD A350 Gr. LF2, CL.1 Lever Op. BA-2601L
1/2″ thru 2” 6000 CWP SW A350 Gr. LF2, CL.1 Lever Op. BA-3601L
1/2″ thru 2” 6000 CWP SWxTHRD A350 Gr. LF2, CL.1 Lever Op. BA-4601L
2” CL 1500 RTJ A352 Gr. LCC RP, Lever Op. BA-1151LTR
2” CL 1500 RTJ A352 Gr. LCC FP, Lever Op. BA-1151LTF
3” thru 24” CL 1500 RTJ A352 Gr. LCC RP, Gear Op. BA-1151GTR
3” thru 24” CL 1500 RTJ A352 Gr. LCC FP, Gear Op. BA-1151GTF
GLOBE 1/2″ thru 2” CL 1500 THRD A352 Gr. LCC Handwheel Op. GL-2151H
1/2″ thru 2” CL 1500 SW A352 Gr. LCC Handwheel Op. GL-3151H
1/2″ thru 2” CL 1500 SWxTHRD A352 Gr. LCC Handwheel Op. GL-4151H
2” thru 3” CL 1500 RTJ A352 Gr. LCC Handwheel Op. GL-1151H
4” thru 24” Use either Ball Valves or Gate Valves  
CHECK 1/2″ thru 2” CL 1500 THRD A350 Gr. LF2, CL.1   CH-2151
1/2″ thru 2” CL 1500 SW A350 Gr. LF2, CL.1   CH-3151
1/2″ thru 2” CL 1500 SWxTHRD A350 Gr. LF2, CL.1   CH-4151
2” thru 24” CL 1500 RTJ A352 Gr. LCC Swing CH-1151S
2” thru 24” CL 1500 RTJ A352 Gr. LCC Piston CH-1151P
2” thru 24” CL 1500 RTJ A352 Gr. LCC Wafer CH-1151W
NEEDLE 1/2″ thru 3/4″ 10000 CWP SS FNPT x FNPT NE-2101
1/2″ thru 3/4″ 10000 CWP SS MNPT x FNPT NE-5101
1” and above Use either Ball Valves or Globe Valves  
TUBING
APPLICATION SIZE WALL THICKNESS GENERAL DESCRIPTION NOTES
NORMAL 3/8” 0.049” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
1/2″ 0.065” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
3/4″ 0.083” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
1” 0.109” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
VIBRATING 3/8” 0.065” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
1/2″ 0.083” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
3/4″ 0.095” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
1” 0.120” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
OTHER
TYPE SIZE RANGE RATING/CLASS GENERAL DESCRIPTION NOTES
PLUG 1/2″ thru 2” 9000 CWP Solid Hex Head, THRD A350 Gr. LF2, CL.1 5.3.12
SPECTACLE BLIND 1/2″ thru 24” 1500 API 590, RTJ A516 Gr. 70N  
SPADE & SPACER 1/2” thru 24” 1500 API 590, RTJ A516 Gr. 70N  
STRAINER 1/2″ thru 2” 1500 Y-Type, SW/THRD A351 CF8M  
2” thru 24” 1500 Cone Type, RTJ A516 Gr. 70N  


SPECIFICATION: E2SZ

Plant and Facility Piping – CSA Z662 Code (Note 2.4.2.1 & 5.3.20)

Service: Sour Hydrocarbons, Amines, Sour Water, Acid Gas, Boiler Feed Water, Steam, Steam Condensate and Produced Water – Low Temperature
Pressure Rating: 24820 kPag
Temperature Rating: -45ºC to 38ºC
ANSI Class: 1500 (/PN 250) (Note 5.3.18)
Corrosion Allowance: 3.2 mm (Note 5.3.6)
PWHT: Note 5.3.14
Non-Des. Examination: Visual. Radiographic 100% for buttwelds). Hydro-test to 1.4 times the internal design pressure (i.e. test pressure = 34750 kPag) (Note 5.3.19).
Pressure Design Factors: Design Factor: 0.8, Location Factor: 0.625, Joint Factor: 1.0, Temperature Factor 1.0. Design limited to 50% of SMYS in order to comply with AB Pipeline Regulation.
PIPE
TYPE SIZE RANGE END CONDITIONS GENERAL DESCRIPTION NOTES
PIPE 1/2″ thru 1-1/2” THRD & SW Sch. XXS min. wall A333 Gr. 6 SMLS 5.3.1, 5.3.11
PIPE 2″ thru 6″ BW Sch. XXS min. wall A333 Gr. 6 SMLS 5.3.1, 5.3.10
PIPE All Other Sizes BW WT as per CSA Z662 A333 Gr. 6 SMLS 5.3.1, 5.3.10
FLANGES
TYPE SIZE RANGE RATING/CLASS GENERAL DESCRIPTION NOTES
RTJTHRD/SW 1/2” thru 2” 1500 Schedule to match pipe A350 Gr. LF2, CL.1 5.3.4, 5.3.5,

 

5.3.11

RTJWN 2” thru 24” 1500 Schedule to match A350 Gr. LF2, CL.1 5.3.4, 5.3.5
RTJ BLIND 1/2” thru 24” 1500 A350 Gr. LF2, CL.1 5.3.5
RTJTHRD ORIFICE 1/2″ thru 2” 1500 A350 Gr. LF2, CL.1 5.3.5, 5.3.11
RTJSW ORIFICE 1/2″ thru 2” 1500 Schedule to match pipe A350 Gr. LF2, CL.1 5.3.4, 5.3.5,

 

5.3.11

RTJWN ORIFICE 2” thru 24” 1500 Schedule to match A350 Gr. LF2, CL.1 5.3.4, 5.3.5
FITTINGS
TYPE SIZE RANGE RATING/SCHEDULE GENERAL DESCRIPTION NOTES
THRD & SW 1/2” thru 2” 9000 CWP A350 Gr. LF2, CL.1 (Nipple and swages as 5.3.4, 5.3.11
BW 2″ thru 24” Sch. to match pipe A420 Gr. WPL6 5.3.4
BOLTS & GASKETS
ITEM SIZE RANGE RATING/CLASS GENERAL DESCRIPTION NOTES
BOLTS 1/2” thru 24”   A320 Gr. L7M Stud Bolts c/w A194 Gr. L7M Heavy Hex Nuts  
GASKETS 1/2″ thru 24” 1500 1/8” Thk. Spiral Wound, 316SS, Non-Asbestos Filler (Flexible Graphite Filler)  
RING JOINTS 1/2″ thru 24” 1500 Oval Ring Soft Iron (316 SS)  
OLETS
TYPE SIZE RANGE RATING/SCHEDULE GENERAL DESCRIPTION NOTES
THREAD-O-LET 1/2″ thru 2” 9000 CWP A350 Gr. LF2, CL.1 5.3.11
SOCK-O-LET 1/2″ thru 2” 9000 CWP A350 Gr. LF2, CL.1 5.3.4, 5.3.11
WELD-O-LET 2” thru 10” Sch. to match pipe A350 Gr. LF2, CL.1 5.3.4
VALVES
TYPE SIZE RANGE GENERAL DESCRIPTION TAG
GATE 1/2″ thru 2” CL 1500 THRD A350 Gr. LF2, CL.1 Handwheel Op. GA-2153H
1/2″ thru 2” CL 1500 SW A350 Gr. LF2, CL.1 Handwheel Op. GA-3153H
1/2″ thru 2” CL 1500 SWxTHRD A350 Gr. LF2, CL.1 Handwheel Op. GA-4153H
2” thru 4” CL 1500 RTJ A352 Gr. LCC RP, Handwheel Op. GA-1153HR
2” thru 4” CL 1500 RTJ A352 Gr. LCC FP, Handwheel Op. GA-1153HF
6” thru 24” CL 1500 RTJ A352 Gr. LCC RP, Gear Op. GA-1153GR
6” thru 24” CL 1500 RTJ A352 Gr. LCC FP, Gear Op. GA-1153GF
BALL 1/2″ thru 2” 6000 CWP THRD A350 Gr. LF2, CL.1 Lever Op. BA-2603L
1/2″ thru 2” 6000 CWP SW A350 Gr. LF2, CL.1 Lever Op. BA-3603L
1/2″ thru 2” 6000 CWP SWxTHRD A350 Gr. LF2, CL.1 Lever Op. BA-4603L
2” CL 1500 RTJ A352 Gr. LCC RP, Lever Op. BA-1153LTR
2” CL 1500 RTJ A352 Gr. LCC FP, Lever Op. BA-1153LTF
3” thru 24” CL 1500 RTJ A352 Gr. LCC RP, Gear Op. BA-1153GTR
3” thru 24” CL 1500 RTJ A352 Gr. LCC FP, Gear Op. BA-1153GTF
GLOBE 1/2″ thru 2” CL 1500 THRD A352 Gr. LCC Handwheel Op. GL-2153H
1/2″ thru 2” CL 1500 SW A352 Gr. LCC Handwheel Op. GL-3153H
1/2″ thru 2” CL 1500 SWxTHRD A352 Gr. LCC Handwheel Op. GL-4153H
2” thru 3” CL 1500 RTJ A352 Gr. LCC Handwheel Op. GL-1153H
4” thru 24” Use either Ball Valves or Gate Valves  
CHECK 1/2″ thru 2” CL 1500 THRD A350 Gr. LF2, CL.1   CH-2153
1/2″ thru 2” CL 1500 SW A350 Gr. LF2, CL.1   CH-3153
1/2″ thru 2” CL 1500 SWxTHRD A350 Gr. LF2, CL.1   CH-4153
2” thru 24” CL 1500 RTJ A352 Gr. LCC Swing CH-1153S
2” thru 24” CL 1500 RTJ A352 Gr. LCC Piston CH-1153P
2” thru 24” CL 1500 RTJ A352 Gr. LCC Wafer CH-1153W
NEEDLE 1/2″ thru 3/4″ 10000 CWP SS FNPT x FNPT NE-2103
1/2″ thru 3/4″ 10000 CWP SS MNPT x FNPT NE-5103
1” and above Use either Ball Valves or Globe Valves  
TUBING
APPLICATION SIZE WALL THICKNESS GENERAL DESCRIPTION NOTES
NORMAL 3/8” 0.049” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
1/2″ 0.065” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
3/4″ 0.083” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
1” 0.109” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
VIBRATING 3/8” 0.065” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
1/2″ 0.083” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
3/4″ 0.095” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
1” 0.120” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
OTHER
TYPE SIZE RANGE RATING/CLASS GENERAL DESCRIPTION NOTES
PLUG 1/2″ thru 2” 9000 CWP Solid Hex Head, THRD A350 Gr. LF2, CL.1 5.3.12
SPECTACLE BLIND 1/2″ thru 24” 1500 API 590, RTJ A516 Gr. 70N  
SPADE & SPACER 1/2” thru 24” 1500 API 590, RTJ A516 Gr. 70N  
STRAINER 1/2″ thru 2” 1500 Y-Type, SW/THRD A351 CF8M  
2” thru 24” 1500 Cone Type, RTJ A516 Gr. 70N  


Plant and Facility Piping – CSA Z662 Code (Note 5.3.20)

SPECIFICATION: F2Z

Service: Sweet Hydrocarbons, Fuel Gas, Glycol, Caustic, Process Drains, Flare, Vent and Air – Low Temperature
Pressure Rating: 41370 kPag
Temperature Rating: -45ºC to 38ºC
ANSI Class: 2500 (/PN 420) (Note 5.3.18)
Corrosion Allowance: 1.6 mm (Note 5.3.6)
PWHT: Note 5.3.14
Non-Des. Test: Visual. Radiographic 15% for buttwelds. Hydro-test to 1.4 times the internal design pressure (i.e. test pressure = 57920 kPag) (Note 5.3.19).
Pressure Design Factors: Design Factor: 0.8, Location Factor: 0.625, Joint Factor: 1.0, Temperature Factor: 1.0.
PIPE
TYPE SIZE RANGE END CONDITIONS GENERAL DESCRIPTION NOTES
PIPE 1/2″ thru 2” SW Sch. XXS min. wall A333 Gr. 6 SMLS 5.3.1, 5.3.11
PIPE 2″ thru 3″ BW Sch. XXS min. wall CSA Gr. 290 Cat II 5.3.1, 5.3.10
PIPE 4” thru 6″ BW Sch. XXS min. wall CSA Gr. 359 Cat II 5.3.1, 5.3.10
PIPE All Other Sizes BW WT as per CSA Z662 CSA Gr. 359 Cat II 5.3.1, 5.3.10
FLANGES
TYPE SIZE RANGE RATING/CLASS GENERAL DESCRIPTION NOTES
RTJTHRD/SW 1/2” thru 2” 2500 Sch. to match pipe A350 Gr. LF2, CL.1 5.3.4, 5.3.5,

 

5.3.11

RTJWN 2” thru 24” 2500 Sch. to match pipe A350 Gr. LF2, CL.1 5.3.4, 5.3.5
RTJ BLIND 1/2” thru 24” 2500 A350 Gr. LF2, CL.1 5.3.5
RTJTHRD ORIFICE 1/2″ thru 2” 2500 A350 Gr. LF2, CL.1 5.3.5, 5.3.11
RTJSW ORIFICE 1/2″ thru 2” 2500 Sch. to match pipe A350 Gr. LF2, CL.1 5.3.4, 5.3.5,

 

5.3.11

RTJWN ORIFICE 2” thru 24” 2500 Sch. to match pipe A350 Gr. LF2, CL.1 5.3.4, 5.3.5
FITTINGS
TYPE SIZE RANGE RATING/SCHEDULE GENERAL DESCRIPTION NOTES
THRD & SW 1/2” thru 2” 9000 CWP A350 Gr. LF2, CL.1 (Nipples/swages as per 5.3.4, 5.3.11
BW 2″ thru 24” Sch. to match pipe A420 Gr. WPL6 5.3.4
BOLTS & GASKETS
ITEM SIZE RANGE RATING/CLASS GENERAL DESCRIPTION NOTES
BOLTS 1/2” thru 24”   A320 Gr. L7 Stud Bolts c/w A194 Gr. L7 Heavy Hex Nuts  
GASKETS 1/2″ thru 24” 2500 1/8” Thk. Spiral Wound, 316SS, Non-Asbestos Filler (Flexible Graphite Filler)  
RING JOINTS 1/2″ thru 24” 2500 Oval Ring Soft Iron (316 SS)  
OLETS
TYPE SIZE RANGE RATING/SCHEDULE GENERAL DESCRIPTION NOTES
THREAD-O-LET 1/2″ thru 2” 9000 CWP A350 Gr. LF2, CL.1 5.3.11
SOCK-O-LET 1/2″ thru 2” 9000 CWP A350 Gr. LF2, CL.1 5.3.4, 5.3.11
WELD-O-LET 2” thru 10” Sch. to match pipe A350 Gr. LF2, CL.1 5.3.4
VALVES
TYPE SIZE RANGE GENERAL DESCRIPTION TAG
GATE 1/2″ thru 2” CL 2500 THRD A350 Gr. LF2, CL.1 Handwheel Op. GA-2151H
1/2″ thru 2” CL 2500 SW A350 Gr. LF2, CL.1 Handwheel Op. GA-3151H
1/2″ thru 2” CL 2500 SWxTHRD A350 Gr. LF2, CL.1 Handwheel Op. GA-4151H
2” thru 4” CL 2500 RTJ A352 Gr. LCC RP, Handwheel Op. GA-1151HR
2” thru 4” CL 2500 RTJ A352 Gr. LCC FP, Handwheel Op. GA-1151HF
6” thru 24” CL 2500 RTJ A352 Gr. LCC RP, Gear Op. GA-1151GR
6” thru 24” CL 2500 RTJ A352 Gr. LCC FP, Gear Op. GA-1151GF
BALL 1/2″ thru 2” 6000 CWP THRD A350 Gr. LF2, CL.1 Lever Op. BA-2601L
1/2″ thru 2” 6000 CWP SW A350 Gr. LF2, CL.1 Lever Op. BA-3601L
1/2″ thru 2” 6000 CWP SWxTHRD A350 Gr. LF2, CL.1 Lever Op. BA-4601L
2” CL 2500 RTJ A352 Gr. LCC RP, Lever Op. BA-1151LTR
2” CL 2500 RTJ A352 Gr. LCC FP, Lever Op. BA-1151LTF
3” thru 24” CL 2500 RTJ A352 Gr. LCC RP, Gear Op. BA-1151GTR
3” thru 24” CL 2500 RTJ A352 Gr. LCC FP, Gear Op. BA-1151GTF
GLOBE 1/2″ thru 2” CL 2500 THRD A352 Gr. LCC Handwheel Op. GL-2151H
1/2″ thru 2” CL 2500 SW A352 Gr. LCC Handwheel Op. GL-3151H
1/2″ thru 2” CL 2500 SWxTHRD A352 Gr. LCC Handwheel Op. GL-4151H
2” thru 3” CL 2500 RTJ A352 Gr. LCC Handwheel Op. GL-1151H
4” thru 24” Use either Ball Valves or Gate Valves  
CHECK 1/2″ thru 2” CL 2500 THRD A350 Gr. LF2, CL.1   CH-2151
1/2″ thru 2” CL 2500 SW A350 Gr. LF2, CL.1   CH-3151
1/2″ thru 2” CL 2500 SWxTHRD A350 Gr. LF2, CL.1   CH-4151
2” thru 24” CL 2500 RTJ A352 Gr. LCC Swing CH-1151S
2” thru 24” CL 2500 RTJ A352 Gr. LCC Piston CH-1151P
2” thru 24” CL 2500 RTJ A352 Gr. LCC Wafer CH-1151W
NEEDLE 1/2″ thru 3/4″ 10000 CWP SS FNPT x FNPT NE-2101
1/2″ thru 3/4″ 10000 CWP SS MNPT x FNPT NE-5101
1” and above Use either Ball Valves or Globe Valves  
TUBING
APPLICATION SIZE WALL THICKNESS GENERAL DESCRIPTION NOTES
NORMAL 3/8” 0.049” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
1/2″ 0.065” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
3/4″ 0.083” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
1” 0.109” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
VIBRATING 3/8” 0.065” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
1/2″ 0.083” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
3/4″ 0.095” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
1” 0.120” A269 SMLS SS / A334 Gr. 6 SMLS CS 5.3.15
OTHER
TYPE SIZE RANGE RATING/CLASS GENERAL DESCRIPTION NOTES
PLUG 1/2″ thru 2” 9000 CWP Solid Hex Head, THRD A350 Gr. LF2, CL.1 5.3.12
SPECTACLE BLIND 1/2″ thru 24” 2500 API 590, RTJ A516 Gr. 70N  
SPADE & SPACER 1/2” thru 24” 2500 API 590, RTJ A516 Gr. 70N  
STRAINER 1/2″ thru 2” 2500 Y-Type, SW/THRD A351 CF8M  
2” thru 24” 2500 Cone Type, RTJ A516 Gr. 70N